PK3564

PK3564 complete Power Analysis System includes PS3550 Power Analyzer, AC charger, Quick-Start manual, deluxe voltage leads, four eFX6000 flexible current probes, SD memory card, CAS3 hard-shell carrying case, PSM-A Software, and 1-year deluxe warranty.

The PK3564 has the essentials for comprehensive power studies, energy audits, load studies, and more. Wide-range flexible current probes allow you to get into tight and confined spaces, wrap around large conductors, and measure almost any AC circuit that comes your way.

For Power Quality studies choose the PS4550 Power Quality Analyzer

 
PURCHASE or RENT: We are the largest power analysis rental service in the USA. You are renting from the manufacturer for the best technical support and fast delivery. Rent or buy from 1 to 100 systems at a time.

$4,290.00

Summary   |   Features   |   Specifications   |   Documents  |   Components   |   Recommended Products

PK3564 complete Power Analysis System includes PS3550 Power Analyzer, AC charger, Quick-Start manual, deluxe voltage leads, four eFX6000 flexible current probes, SD memory card, CAS3 hard-shell carrying case, PSM-A Software, and 1-year deluxe warranty.

This system contains the essentials for almost any power analysis study in the world. Other tiers in the PK3564 class include the PK3564 PRO and PK3564 PRO+ systems.

Features

Measure and log all common power measurement types:  V, A, W, VA, VAR, kWH, PF, Hz, THD, etc.

Wide range of operating modes:

  • frequency modes for 50Hz, 60Hz, 400Hz, variable frequency systems, and DC to cover all your needs.
  • power modes for Positive Power Only (to get the correct answers even if a current probe is backwards), Negative Power Allowed (for regenerative circuits), 2 Current Power (for special distribution and metering systems), quad-power (for multiple parallel single-phase loads)
  • Programmed start and/or stop for precise monitoring sessions, Stop When Full, Never Stop

Able to evaluate all power systems: 3 phase Wye, 3 phase Delta (including 4-wire, open, and grounded), split-phase, single phase, quad single phase (using same source) , 3PT/3CT, 3PT/2CT, 2 current power, DC, quad DC (using same source).

The included Advanced PowerSight Manager software (PSM-A) improves your efficiency and eliminates sources of error at each stage of the monitoring process:

PS3550-connected-to-power

Benefit from the safety rating of 1000V CAT III, 600V CAT IV and Bluetooth Wireless Communications (remote viewing/control of the display without the burden of wearing PPE).

SD Memory Card provides redundant storage and essentially unlimited logging capacity.

Extend the measurement range with the use of our industry-widest array of accessories and options:

  • measure down to 0.002 amps AC (HA-GFD)
  • measure from 5 to 2000 amps DC (DC600/DC2000)
  • direct connect and measure to 15kV (5KVP/15KVP)

First rate technical support, direct from the manufacturer to you!

Specifications

General Specs

Category Notes
Size PS3550:  3.88″ (9.86 cm) W x 7.72″ (19.61 cm) L x 1.58″ (4.01 cm) Deep at bottom end; 2.14″ (5.44 cm) Deep at top end
Weight PS3550:  1.1 lbs (0.5 kg)
Operating Range 32 – 122 degrees F (0 – 50 degrees C) Relative humidity to 70% (non-condensing)
Power Requirement 12V DC @ 500 mA
Battery Life 8-10 hours after full charge
Battery Type Li-ion
Sampling Rate 16 microseconds for Voltage and Current
Safety 600V CAT IV, 1000V CAT III
SD Card Slot Accepts SD Cards to 32GB (SDHC)
Logging Period (Resolution) 1 Second – 99 Minutes
Logging Duration (Length of session) up to 2 years according to memory allocation
Internal Data Retention 8 years
Other Measurements Crest Factor, K Factor, Peak Demand Period, Peak Demand of Peak, Demand Period, Duty Cycle, On/Off Cycle %, Avg. On Time, Avg Off Time

Voltage Measurement

Category Notes
Measurement Range 1 to 1000 volts (using included voltage probes), to 15,000 volts (with optional 15KVP voltage probes), to 6 megavolts (with input ratios)
Display Resolution 0.1V (below 400V), 1V (400V to 3999V), 10V (4000V to 39.99KV)
Accuracy 0.5% of reading ±0.3 Vrms

Current Measurement

Category Notes
Measurement Range 2 milliamp (with optional HA-GFD), to 6,000 amps (using included eFX6000 current probes), to 6 megamps (with input ratios)
Display Resolution 0.1 amps (below 400A), 1.0 amp (400 amps and above)
Accuracy ±0.5 % of reading plus accuracy of probes
LDCm top view

LDCm Line-to-DC Converter Mini

120ADP top small

120ADP 120V Test Adapter

USB-Communications-Cable

USB-COMM 6ft Cable

5KVP Set

5KVP Set of 3 Voltage Probes

PS3550-Warranty-Icon

WAR42/41 Ext. Warranty

Other Relevant Items

PK3564-PRO small

PK3564-PRO

PK3564-PRO+ small

PK3564-PRO+

CASW closed with cables exiting

CASW Carrying Case

Bluetooth Adapter small

BTA Bluetooth Adapter

Calibration-certificate-thumbnail

Calibration Certificate